Canon Pixma MG 7550 series error codes (part 4)

Prezentarea listei de coduri de erori
Canon Pixma MG 75xx (partea 4)

 

(Continuare:)
…..Intrucit aceste informatii sunt destinate in special tehnicienilor de service, am gasit de cuviinta sa le prezint in limba engleza! La urmatoarele update-uri, vom prezenta si versiunea in limba romana!
………………………………….Support Code List

The support code appears on the LCD and the computer screen when an error occurs. When an error occurs, check the support code displayed on the LCD or the computer screen and take the appropriate action.

---

Errors : 2000 to C000 (part 4)
***…
2110, 2112
Cause: The paper settings for printing or copying are different from the cassette paper information registered to the machine.
…
2121/ 2122
Cause: The paper settings of the cassette 1/2 is not complete.
…
2500
Cause: The cause of following may have occurred the failure of Automatic Print Head Alignment.
>> Print head nozzles are clogged.
>> The paper of size other than A4 or Letter is loaded in the cassette 2.
>> The paper output slot is exposed to strong light.
Action: Tap OK on the touch screen to dismiss the error, then take the actions described below.
>> Print the nozzle check pattern to check the status of the print head.
>> Load one sheet of A4/Letter-sized plain paper and perform Automatic Print Head Alignment again.
>> Adjust your operating environment and/or the position of the machine so that the paper output slot is not exposed directly to strong light.
After carrying out the above measures, if the problem continues after aligning the print head again, tap OK on the touch screen to dismiss the error, and then perform Manual Print Head Alignment.
…
2700
Cause: Some errors occurred while copying and a certain time passed.
Action: Tap OK on the touch screen to dismiss the error, and try to copy again.
…
4100
Cause: The specified data cannot be printed.
Action: When you print the contents on CREATIVE PARK PREMIUM, confirm the message on the computer screen, make sure that genuine Canon ink tanks are installed properly for all colors, then start printing again.
…
4101
Cause: The machine does not support the paper size you specified.
Action: Touch the Stop button, specify the proper paper size, then print again.
If you print on the non-standard size paper, you can specify a custom size within the following range to print.
…
4103
Cause: Cannot perform printing with the current print settings.
Action: Touch the machine’s Stop button to cancel printing.
Then change the print settings and print again.
…
5011, 5012
Cause: Printer error has occurred.
Action: Turn off the machine, and unplug the power cord of the machine from the power supply.
Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.
…
5100
Cause: Printer error has occurred.
Action:Cancel printing and turn off the machine.
Then confirm the following.
>> Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving.
>> If any, remove the materials.
>> Confirm that the ink tanks are installed properly.
>> Push an ink tank until it clicks into place.
>> After confirming the conditions above, turn on the machine again.
>> If the problem is not resolved, contact the service center.
…
5101, 5200, 5400, 5C00, 5C20, 6000, 6500, 6502, 6800, 6801, 6900, 6901, 6902, 6910, 6911, 6920, 6921, 6930, 6931, 6932, 6933, 6934, 6935, 6936, 6937, 6938, 6940, 6941, 6942, 6943, 6944, 6945, 6946, 6950, 6B20,
Cause: Printer error has occurred.
Action: Remove the protective material that is preventing the print head holder from moving, turn the machine off, and turn it back on.
If the problem is not resolved, contact the service center.
…
5B00, 5B01,5B10, 5B11,
Cause: Printer error has occurred.
Action: Contact the service center.
…
6001, 6003
Cause: Printer error has occurred.
Action: If the paper output tray is closed, open it.
Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on.
If the problem is not resolved, contact the service center.
…
B202, B203, B204
Cause: An error requiring you to contact the service center has occurred.
Action: Turn off the machine, and unplug the power cord of the machine from the power supply.
Contact the service center.
…
C000
Cause:Printer error has occurred.
Action: Cancel printing and turn off the machine.
Then confirm the following.
>> Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving.
If any, remove the materials.
>> Confirm that the ink tanks are installed properly.
Push an ink tank until it clicks into place.
After confirming the conditions above, turn on the machine again.
If the problem is not resolved, contact the service center.
…
sursa: http://www.canon.com

Final !

De la mine, numai bine!

= Nota 4.20